CONWELL 1kv Anchoring Clamp PA25 for 6-25mm2 Aerial Cable Clamp

Short Description:

CONWELL PA25 Anchoring Clamps for Insulated Neutral Messenger System is used along with a bracket or other supporting hardware, and is used to strain the insulated service conductor of a LV-ABC system without damaging the cable’s insulation. The main application of CONWELL PA25 Anchoring Clamps are to bring service connections to households or street lighting. The clamps can be used for anchoring 6-25mm2 service cables.

Send email to us

Product Detail

Product Tags

Product Introduction

1kv Anchoring Clamp PA25 for 6-25mm2 Aerial Cable
Product introduction of 1kv Anchoring Clamp PA25 for 6-25mm2 Aerial Cable
The CONWELL PA25 Anchoring Clamps are specifically designed to strain the insulated service conductor of a Low Voltage Aerial Bundled Cable (LV-ABC) system without causing any damage to the cable's insulation. These clamps are typically used in conjunction with a bracket or other supporting hardware.

The primary application of the CONWELL PA25 Anchoring Clamps is to facilitate the installation of service connections for households or street lighting. They are used to anchor service cables with a cross-sectional area ranging from 6mm2 to 25mm2.

By securely holding the insulated service conductor in place, these clamps ensure that the cable remains properly tensioned and prevents any strain or stress on the cable's insulation. This helps maintain the integrity of the cable and ensures reliable and safe electrical connections to the desired locations.

It's worth noting that while the information provided describes the general application and features of CONWELL PA25 Anchoring Clamps, specific usage instructions and compatibility may vary. It's always recommended to refer to the manufacturer's documentation or guidelines for precise details on installation and usage of the clamps.

Product Parameter

Product Parameter of 1kv Anchoring Clamp PA25 for 6-25mm2 Aerial Cable

Model	Cross-section(mm²)	Messenger DIA.(mm²)	Breaking LoadkN)
PA25	6~25	4~9	4

Product Feature

Product Feature of 1kv Anchoring Clamp PA25 for 6-25mm2 Aerial Cable
-- Exceeds requirements of NF C 33-042 and other international standards.
-- Withstands extreme conditions leading to long life, safety, low maintenance and reduced lifetime cost.
-- Engineering plastics provide additional insulation, strength and enable live line working without additional tools.
-- Two clamps with a bracket used for large angle assembly which allows for easy turning in congested areas.
-- Captive Design Clamp with a bracket used for straining, reduces installation time and cost.